Smart Infrastructure
Smart infrastructure connects physical assets with sensors, communications and control systems, making them easier to monitor, automate and manage.
CML Micro provides wireless technologies for connected infrastructure applications requiring reliable remote monitoring and intelligent control.
CML AI
Instant answers, datasheets, application advice, and technical support - 24/7.
JIS C 0920
JIS C 0920
JIS C 0920
Start typing to search…
CMX469A
1200/2400/4800 Baud FFSK/MSK Modem
General purpose audio-band FFSK modem data-pump
- Modulation Schemes
- 1200 2400 4800
- Data Range (kbps)
- 3.0 - 5.5
- Supply Voltage (V)
- 3.0 - 5.5
- Typ. Current (mA)
- 4.5
- Package Type
- 20-SOIC 24-TSSOP
CMX655D
Ultra-low Power Voice Codec
MEMS microphone support Ultra-low operating power consumption
- Voice-data Scheme
- PCM (linear, A-law, µ-law)
- Voice-band Codec
- Yes
- Supply Voltage (V)
- 1.8 - 3.6
- Typ. Current (mA)
- 300µA
- Package Type
- 24-VQFN
- Additional Features
- 1W Speaker Driver
CMX673
Call Progress Tone Detector
Universal call progress detector
- Signalling
- Single Call Progress Dual Tone Detectors
- Supply Voltage (V)
- 2.7 - 5.5
- Typ. Current (mA)
- 0.5
- Package Type
- 16-pin SOIC 20-pin TSSOP
CMX683
Call Progress Tone Detector Plus Voice Detector
Call progress detector with voice detection
- Signalling
- Single Call Progress Dual Tone Detectors
- Supply Voltage (V)
- 2.7 - 5.5
- Typ. Current (mA)
- 0.6
- Package Type
- 16-pin SOIC TSSOP
CMX7163
QAM (I/Q) Wireless Data Modem
High speed QAM packet data modem for I/Q based systems
- Modulation Schemes
- 4/16/32/64 QAM
- Data Range (kbps)
- QAM <= 96
- Supply Voltage (V)
- 3.0 - 3.6
- Typ. Current (mA)
- Rx 18.7 Tx 12.7
- Package Type
- 64-VQFN 64-LQFP
- Auxiliary Features
- ADCs, DACs System Clocks GPIO RAMDAC
CMX7164
Multi-mode (I/Q) Wireless Data Modem
Multi-mode packet data modem for I/Q based systems
- Modulation Schemes
- GMSK/GFSK 2/4/8/16 FSK 4/16/32/64 QAM V.23 Modem
- Data Range (kbps)
- GMSK <=19.2 4 FSK <=20 8 FSK <=40 QAM <=96
- Supply Voltage (V)
- 3.0 - 3.6
- Typ. Current (mA)
- Rx 17.9 Tx 12.7
- Package Type
- 64-VQFN 64-LQFP
- Auxiliary Features
- ADCs, DACs System Clocks GPIO RAMDAC
CMX865A
DTMF/FSK Combo
PABX applications
- V.23
- Yes
- V.21
- Yes
- Bell 202
- Yes
- Bell 103
- Yes
- DTMF
- Yes
- Supply Voltage (V)
- 3.0 - 5.5
- Typ. Current (mA)
- 1
- Package Type
- 16-pin SOIC
CMX868A
V.22 bis Modem
Ring Detect, USART Hybrid support, Line equalisation
- V.32
- /
- V.22
- Yes bis
- V.23
- Yes
- V.21
- Yes
- Bell 202
- Yes
- Bell 103
- Yes
- DTMF
- Yes
- CLI
- Yes
- Supply Voltage (V)
- 2.7 - 5.5
- Typ. Current (mA)
- 3
- Package Type
- 24-pin SOIC TSSOP
CMX869B
V.32 bis Modem
Ring detect, USART, Hybrid support, Line equalisation
- V.32
- Yes
- V.22
- Yes bis
- V.23
- Yes
- V.21
- Yes
- Bell 202
- Yes
- Bell 103
- Yes
- DTMF
- Yes
- CLI
- Yes
- Supply Voltage (V)
- 3.0 - 3.6
- Typ. Current (mA)
- 8.6
- Package Type
- 24-pin SOIC TSSOP
CMX90A003
CMX90A003 1W 860 – 960 MHz Power Amplifier
The CMX90A003 is a two-stage, fully matched MMIC PA delivering +29.5 dBm of saturated power for use in the 860 – 960 MHz frequency range, applicable to license-free bands.
- Frequency (MHz)
- 860 - 960
- Gain (dB)
- 30
- Psat (dBm)
- 29.5
- Efficiency (%)
- 49%
- Voltage (V)
- 1.9 - 3.0
- Bias Current (mA)
- 70
- RF Match
- Int / Int
- Package (mm)
- 4×4 QFN
CMX90A004
CMX90A004 2W 860 –960 MHz Power Amplifier
The CMX90A004 is a two-stage, fully matched MMIC PA delivering +32.5dBm of saturated power for use in the 860 – 960 MHz frequency range, applicable to license-free bands.
- Frequency (MHz)
- 860 - 960
- Gain (dB)
- 30
- Psat (dBm)
- 32.5
- Efficiency (%)
- 49%
- Voltage (V)
- 2.7 - 4.5
- Bias Current (mA)
- 78
- RF Match
- Int / Int
- Package (mm)
- 4×4 QFN
CMX90A006
CMX90A006 2W 860-930 MHz Linear PA
The CMX90A006 is a two-stage linear RF power amplifier in QFN package, delivering +33 dBm of output power at 1 dB gain compression over the frequency range of 860 – 930 MHz, applicable to license-free bands.
- Frequency (MHz)
- 860 - 930
- Gain (dB)
- 33
- P1dB (dBm)
- 33
- Psat (dBm)
- 33.5
- Efficiency (%)
- 52%
- Voltage (V)
- 2.5 - 5.25
- Bias Current (mA)
- 206
- RF Match
- Int / Ext
- Package (mm)
- 4x4 QFN
CMX90A007
CMX90A007 2W 136 – 1000 MHz 2-stage Driver Amplifier
The CMX90A007 is a high gain two-stage GaAs HBT driver amplifier in a plastic QFN package, delivering +33.5 dBm (2.2 W) of output power with >55 % efficiency at 435 MHz and 7.4 V.
- Frequency (MHz)
- 136 - 1000
- Gain (dB)
- 27
- Psat (dBm)
- 33.5
- Efficiency (%)
- 53%
- Voltage (V)
- 6.0 - 9.5
- Bias Current (mA)
- 49.5
- RF Match
- Ext / Ext
- Package (mm)
- 4x4 QFN
CMX90A009
CMX90A009 10W 136 – 1000 MHz Power Amplifier
The CMX90A009 is a high efficiency single-stage GaAs HBT power amplifier in thermally enhanced DFN package, delivering +40.0 dBm (10 W) of output power with >60 % efficiency at 435 MHz and 7.4 V.
- Frequency (MHz)
- 136 - 1000
- Gain (dB)
- 17.5
- Psat (dBm)
- 41.5
- Efficiency (%)
- 60%
- Voltage (V)
- 6.0 - 9.5
- Bias Current (mA)
- 136
- RF Match
- Ext / Ext
- Package (mm)
- 4x5 DFN
CMX90G301
CMX90G301 [1.4 – 7.1 GHz] Positive Gain-Slope Amplifier +1 dB
The CMX90G301 is a low-power 50 Ω cascadable MMIC gain block suitable for a wide variety of wireless applications operating in the 1.4 – 7.1 GHz frequency range.
- Frequency (GHz)
- 1.4 - 7.1
- Gain (dB)
- 14.8 - 16
- P1dB (dBm)
- 11.5
- OIP3 (dBm)
- 21.0
- NF (dB)
- 1.9
- Voltage (V)
- 2.7 - 5
- Bias Current (mA)
- 22
- Package (mm)
- 3×3 QFN
CMX90G302
CMX90G302 [1.4 – 7.1 GHz] Positive Gain-Slope Amplifier +2 dB
The CMX90G302 is a low-power 50 Ω cascadable MMIC gain block suitable for a wide variety of wireless applications operating in the 1.4 – 7.1 GHz frequency range.
- Frequency (GHz)
- 1.4 - 7.1
- Gain (dB)
- 14.8 - 16.9
- P1dB (dBm)
- 11.5
- OIP3 (dBm)
- 21.0
- NF (dB)
- 1.9
- Voltage (V)
- 2.7 - 5
- Bias Current (mA)
- 22
- Package (mm)
- 3×3 QFN
CMX90G702
CMX90G702 Positive Gain Slope Amplifier +2dB
The CMX90G702 is a low-power 50 Ω gain block suitable for a wide variety of wireless applications operating in the 6 – 18 GHz frequency range.
- Frequency (GHz)
- 6 - 18
- Gain (dB)
- 9.1 - 11.1
- P1dB (dBm)
- 9.5
- OIP3 (dBm)
- 18.5
- NF (dB)
- 3.0
- Voltage (V)
- 2 - 5
- Bias Current (mA)
- 22
- Package (mm)
- 3×3 QFN
CMX969
RD-LAP, MCD4800 Motient/ARDIS Packet Data Modem
RD-LAP, MDC2800, Motient/ARDIS conformance
- Modulation Schemes
- 4FSK FSK
- Data Range (kbps)
- RD-LAP =19.2 MCD =4.8
- Supply Voltage (V)
- 2.7 - 5.5
- Typ. Current (mA)
- 4
- Package Type
- 24-TSSOP 24-SSOP
CMX983
Analogue Front End (AFE) for Digital Radio
The CMX983 is an Analogue Front End (AFE) IC that bridges the gap between a digital radio’s RF section and the DSP/FPGA.
- FDMA Systems
- Universal
- TDMA Systems
- Universal
- LD or I/Q Interface
- I/Q
- Embedded Functions
- Channel Filters, Audioband Codec, AUX, ADCs, DACs, RAMDAC, GPIO and Speaker Amp, 2 Frac-N Synths
- Supply Voltage (V)
- 3.0 - 3.6
- Typ. Current (mA)
- /
- Typ. Power Consumption (mW)
- /
- Package type
- 64-VQFN
CMX994EF
RF Direct Conversion Receiver IC
Very high IIP2 for true-zero IF DCRx use, low power, complete LNA to zero-IF receiver path, IF filter, gain controls, flexible LO divider for Tx and Rx synth with VCO amp
- RF/IF Range (MHz)
- 100 - 1000
- I/Q BW (MHz)
- >1
- Input IP3 (dBm)
- 6
- Noise Figure (dB)
- 6
- Gain (dB(V/V))
- 62
- Supply Voltage (V)
- 3.0 - 3.6
- Typ. Current (mA)
- 74
- Package Type
- 40 - VQFN
CMX998
Cartesian Feedback Loop
I/Q modulator-based subsystem greatly linearises external RF PA
- RF/IF Range (MHz)
- 30 - 1000
- I/Q BW (MHz)
- 0.2
- Noise Floor (dBm/Hz)
- -155
- Output Power (dBm)
- 3 (PEP)
- Supply Voltage (V)
- 3.0 - 3.6
- Typ. Current (mA)
- 135
- Package Type
- 64-VQFN
FX604/MX604
V.23 Compatible Modem
PABX applications
- V.23
- Yes
- Supply Voltage (V)
- 3.0 - 5.5
- Typ. Current (mA)
- 1
- Package Type
- 16-pin SOIC
FX614/MX614
Bell 202 Compatible Modem
Ideally suited to WLL, FWT, CWT, Hart applications
- Bell 202
- Yes
- Supply Voltage (V)
- 3.0 - 5.5
- Typ. Current (mA)
- 1
- Package Type
- 16-pin SOIC
No products match the selected filters.
Quick Product Selector
Find the part you need for your application using our product selector.
View Full Product Selector Looking for extra information?
Get in touch with your questions and one of the team will get in touch shortly.
CML Microcircuits Ltd
Looking for one of our distributors?
Find your local distributor here
Get in touch
"*" indicates required fields
CML is a proud member of
