CMX7131/CMX7141
– Digital PMR (dPMR) Processors
CMX7131/CMX7141
– Digital PMR (dPMR) Processors
The CMX7131 and CMX7141 are half-duplex processor IC platforms built on FirmASIC® technology that are suitable for use in multi-standard digital PMR (dPMR) and dual-mode (analogue/digital) systems.
FirmASIC® component technology allows on-chip sub-systems to be reconfigured by a Function Image™ (FI): this is a data file that is uploaded during device initialisation that defines the device’s function and feature set.
Dual mode and multi-mode digital PMR radios can now be developed based on a single radio platform conforming to a number of digital PMR systems/standards all with full analogue PMR backward compatibility.
The Ultimate FDMA Digital Radio Chipset
A number of the Function Images now support direct connection to CML’s CMX994 Direct Conversion Receiver. The combination of the CMX7131/7141 and CMX994 enables the highest integration, multi-standard FDMA digital/analogue PMR radio, to be realised. The CMX7131/7141 and CMX994 together address the market requirements for: Low power operation, small size, low cost, flexibility and high performance.
Seven Function Images are available, these can be downloaded from the CML Technical Portal (contact for access):
- CMX7131/7141 FI-1.x – dPMR Baseband Data Processor with Auxiliary System Clocks, ADCs and DACs
- CMX7131/7141 FI-2.x – ARIB STD-T98 DCR Baseband Processor with Auxiliary System Clocks, ADCs and DACs
- CMX7131/7141 FI-3.x – NXDN™ 4-FSK Baseband Data Processor with Auxiliary System Clocks, ADCs and DACs
- CMx7131/7141 FI-5.x – dPMR446 (mode 1/2) and Analogue PMR Baseband Processor with Auxiliary System Clocks, ADCs and DACs
- CMX7131/7141 FI-6.x ARIB STD-T102 Baseband Data Processor with Auxiliary System Clocks, ADCs and DACs
- CMX7131/7141 FI-7.x – dPMR® (mode 1/2/3) Baseband Data Processor (TS 102 658) with Auxiliary System Clocks, ADCs and DACs
- CMX7131/7141 FI-8.x – Analogue PMR Baseband Processor with I/Q Downconversion Interface Interface, Auxiliary System Clocks, ADCs and DACs
Click the links above or visit the “Downloads” section of this page to download the datasheets/access the Technical Portal for each individual Function Image.
Devices are available through our Distributor Network.
Features of the CMX7131/CMX7141 – Digital PMR (dPMR) Processors include:
- Multi-standard Digital PMR Processor Including Analogue PMR Operations
- Automatic Frame Sync Insertion and Detection (AFSD)
- Two Auxiliary ADCs
- Four Auxiliary DACs
- Three Analogue Inputs with Programmable Gain
- Auxiliary C-BUS Interface to CMX608 or CMX618
- Tx Outputs for Two-Point or I/Q Modulation
- Soft Decision Decoding Option
- Two RF Synthesisers (CMX7131 Only)
- Vocoder Connectivity, Management, Control and Data Transport
- RALCWI/TWELP and Third-party Vocoders
Applications the CMX7131/CMX7141 – Digital PMR (dPMR) Processors can be used for:
- Digital PMR Systems
- dPMR
- dPMR446
- dPMR Mode 1/2/3
- ARIB STD-T98 DCR
- ARIB STD-T102
- NXDN
- Analogue PMR
- Dual/Multi-mode Radios
Power Supply Requirements for the CMX7131/CMX7141 – Digital PMR (dPMR) Processors:
- 3.0 to 3.6 V
CMX7131/7141 FAQ
Function Image™ Loading Options
Q. I am about to start a design using one of your FirmASIC® based products, what is the most suitable method of storing the associated Function Image™ in my project?
A. Our FirmASIC® based devices require a Function Image™ to configure their on-chip sub-systems.
This is a data file that is uploaded during device initialisation and defines the device’s function and feature set.
The Function Image™ can be loaded automatically from external serial EEPROM via a dedicated SPI bus or from a host µController over the built-in C-BUS serial interface.It is also possible with two specified memory devices to update the serial memory stored Function Image™ via the C-BUS and SPI interface.
CML supplies a dedicated Thick Stub Function Image™ to enable this capability. The linked flow diagram is an aide-memoir in that it makes it plain what is possible when choosing the most suitable method of storing a Function Image™ for your project.
CMX7131/CMX7141 with the AMBE-3000
Interfacing and implementing the AMBE-3000 Vocoder with the CMX7131/7141 devices for use in digital radio systems.
Download
CMX7131/41 – Interfacing CMX7131/CMX7141 with AMBE-3000™
Two scripts (transmit and receive) to enable interfacing and implementing the DVSI AMBE-3000™ with the CMX7131/CMX7141.
View
CMX7031/41 – CMXsynth1 450M
Synthesiser set-up example. Target board is the PE0201.
PE0402 for 6.144MHz Operation
Changes the PE0402 programming block to allow operation at 6.144MHz Note that some Function Images cannot operate at 6.144MHz
| PE0003 | The PE0003 Evaluation Kit Interface Card is a global interface system for use with evaluation kits for CML’s new generation ICs, including FirmASIC™ based products. This greatly simplifies the approach to the evaluation and design-in process. | PE0003_Product_Preview |
| PE0402 | The PE0402 Platform Evaluation Kit is designed to assist in the evaluation and application development of the CMX704x/CMX714x range of FirmASIC products. | PE0402_Product_Preview
|
Quick Product Selector
Looking for extra information?
Get in touch with your questions and one of the team will get in touch shortly.
Looking for one of our distributors?
Find your local distributor here
Get in touch
"*" indicates required fields
