SCT3268TD
– DMR/dPMR Processor with Analog Mode
SCT3268TD
– DMR/dPMR Processor with Analog Mode
The SCT3268TD is a highly integrated, low power, high performance, Digital/Analog DMR/dPMR/PMR/LMR baseband processor with an embedded vocoder and ARM 32-bit Cortex-M0 host microcontroller.
The SCT3268TD is available from CML’s ‘Sicomm Technologies’ product range that is specifically targeted at high volume and low cost radio applications.
The SCT3268TD includes the entire physical layer, data link layer and much of the call control layer processing of the digital PMR/LMR radio protocols. Combined with a suitable RF front end, external audio codec and host controller, a complete digital radio that also supports analog mode can be developed in a short time frame.
The Design Reference SCT9389 provides a an easy route to developing a 2W multi-mode DMR/dPMR/Analog radio.
Detailed product support is available including an evaluation kit, application notes, FAQs and reference design material.
Devices are available through our Distributor Network.
Features of the SCT3268TD – DMR/dPMR Processor with Analog Mode include:
- Supports Multiple Radio Protocols
- Automatic Digital/Analog mode detection
- DMR standard
- Supports DMR Tier 1, Tier 2
- Air interface Layer 1, Layer 2, Layer 3
- Full Annex C support
- Transmit in slotted or continuous mode
- Receive in slotted or continuous mode
- dPMR standard
- Supports dPMR Tier 1, Tier 2
- Air interface Layer 1, Layer 2, Layer 3
- Supports 1031 Hz Tone and Silence Test Mode
- Full Annex A support
- Analog Mode
- Full audio processing including compander
- CTCSS/DCS detection/generation
- Supports two-point modulation
- Embedded Vocoders
- Support for multiple vocoders
- Embedded: AMBE+2™, RALCWI ™
- External vocoder options
- 4FSK Modem
- 4800/9600 data rate
- Automatic frame sync detection
- Programmable modulation index
- Built-in ARM 32-bit Cortex-M0 Microcontroller
- System frequency up to 48MHz
- 12-channel DMA access
- 12 Timers, 8 USART
- Low power operation
- DMR mode Baseband 64mW, MCU 24mW
- dPMR mode Baseband 38mW, MCU 24mW
Applications the SCT3268TD – DMR/dPMR Processor with Analog Mode can be used for:
- DMR Radio
- dPMR Radio
- Multi-mode Digital PMR/LMR with Analog Mode
Power Supply Requirements for the SCT3268TD – DMR/dPMR Processor with Analog Mode:
- Core 1.2V
- Digital IO 2.5V – 3.3V
For application support please visit the SCT3268TD page on the Technical Portal
If you require access please contact your local CML representative.
For Software support please visit the SCT3268TD page on the Technical Portal
If you require access please contact your local CML representative.
| SCT9389 | The SCT9389 is a small form factor PMR radio transceiver that supports DMR/Analog operation or dPMR/Analog operation and has been tested against EN 300 113 requirements. | SCT9389_Product_Preview |
| SCT9389HDK | The STC9389-HDK Hardware Development Kit implements a complete radio solution based on the SCT9389 design. | SCT9389_HDK_User_Manual |
For a full list of FAQs please visit the SCT3268TD page on the Technical Portal
If you require access please contact your local CML representative.
Quick Product Selector
Looking for extra information?
Get in touch with your questions and one of the team will get in touch shortly.
Looking for one of our distributors?
Find your local distributor here
Get in touch
"*" indicates required fields
