Three scripts to demonstrate operation of the DE9943 under GUI control. Note the DE9943 GUI must be used not the PE0002 GUI.

Setup_9943.pes sets up the DE9943 as a receiver or transmitter and configures the CMX994 as required. The VCTXO can be written to centre the RF frequency. The Skyworks chip is configured for one of eight DPMR Tier I channels (446MHz). The Tx Test modes can be enabled to allow the deviation to be set (constant +3+3-3-3) and the carrier leak to be minimised (constant +3). The CMX994 dc offset can be measured and calibrated out.

Tx_9943_prbs.pes transmits a prbs sequence and Rx_9943_ber_prbs.pes receives and test the data. Detailed results are written to an external file.

The two files prbs511_tx.txt and prbs511_rx.txt contain the required prbs sequence data for the transmit script and receive script respectively.
